8M083X25 R14
APX Series P25 Interface
DVRS Installation & Programming Guide
–
PART II
January 2019
Page 76 of 153
MSU Data
This screen provides MSU data for information purposes only.
PSU IDs Allowed
This menu screen is used to specify PSU IDs (or range of IDs) that are allowed to be
affiliated on the system via DVRS. If analog portables are used and MDC ID pass through
is required, then the PSU MDC ID must be enabled on the System and included in the
PSU ID Data list of the DVR. If the range is set to be from ‘0’ to ‘- -‘, then any PSU ID is
allowed to talk through the DVRS. This screen is Password protected. To view the range
of IDs the User needs to enter a password. To change the PSU ID list the User needs to
log in as Admin (requires password).
DVR Remote Activation IDs
This screen allows the user to enter the console or system radio IDs of units that can page
the MSU and toggle the DVRS mode. The default list is empty i.e. when the MSU is paged,
the DVRS mode is not changed. If the MSU is programmed to have the remote activation
enabled, then any Call Alert Page to the MSU ID from a system unit whose unit ID is
programmed in the DVRS Remote activation ID table, will trigger DVRS mode change. In
addition, a Group Page to a TG the MSU belongs to will toggle the DVRS mode as
described above.
Talkgroup Translation Table
When the local PSU transmits on a TG that is in the DVR Translation table, the call will be
transmitted on the TG currently selected on the MSU control head. The local PSUs must
be programmed with Normal squelch or NAC=F7E in order to be able to receive outbound
(system) or MSU Mic PTT calls when TG Translation is enabled. The
TG Translation
Table allows the user to program the Local PSU TG IDs that are enabled for TG
Translation. The default list is empty, i.e. TG translation is disabled.
IMPORTANT!
Encryption Key Translation is not supported by the DVRS.
IMPORTANT!
The DVRS Translation table (and corresponding PSU programming) must not
contain TG IDs that are used by the trunked FNE side.
