8M083X25 R14
APX Series P25 Interface
DVRS Installation & Programming Guide
–
PART II
January 2019
Page 72 of 153
Field Name
Range
Description
Notes
TG Mode
None
Local
System
User
Disabled
OFF
Enables or Disables Slaving of the
DVR Mode to the selected TG.
‘None’
→
this selection assumes no
specific DVR Mode is linked to the
TG. The DVR stays in the last mode
or the Mode associated with the
DVR Channel.
‘Local’ / ‘System’
→
This selection
forces the DVR Mode to change to
either Local or System respectively
upon selection of the TG.
‘User’
→
The Last DVR Mode that
was selected by the User is in effect
and the User can change it as
required.
‘Disabled’
→
DVR is Disabled when
this TG is selected.
‘OFF’
→
DVR is in OFF mode when
this TG is selected.
The
‘Disabled’
setting
must be selected in case
of multi frequency band
MSU modes (trunked or
conventional) when band
locking is enabled (i.e. no
in-band filters are
installed).
In such case, if a different
TG Mode is selected, the
Tweaker TG Mode field
will be red and the
personality can’t be saved
in the DVRS.
Manual Mode Chg
Enabled
Disabled
Enables or Disables the Mode
change (SYS / LOC) via the VRS
button when a specific TG is
selected.
VR Ch All Alwd
Yes / No
This field specifies if the User can
select from any programmed DVR
channel or from a short list. If
Strapping is Enabled, the DVR will
steer to the programmed strapped
DVR channel, yet the User may still
be able to select a different channel
if more then one entries are enabled
in the ‘VR Ch List’.
VR Ch List
0 - max # of
programmed
DVR
channels
Enables the selection of which DVR
channels are selectable when a
specific MSU TG / Channel is
selected on the MSU CH.
Applicable only if the
“VR
Ch All Alwd”
field is set to
“No”.
RCM (hex)
Read Only
This field is extracted during the
“Import Motorola XML File”
process.
PTT ID
Enabled
Disabled
Enables or Disables the pass
through of the PSU PTT ID through
the DVRS.
Applies to analog mode
(MDC PTT ID).
Sys Repeat
Read Only
This field is extracted during the
“Import Motorola XML File”
process.
Non ASTRO Sign
Read Only
This field is extracted during the
“Import Motorola XML File”
process.
Freq Band
Read Only
This field is extracted during the
“Import Motorola XML File” process.
For APX8500, this field is
set to ’Multiband-InB’ or
“Multiband-XB’ depending
on the DVR-MSU inband
or Crossband
Configuration
TDMA X2
Read Only
This field is extracted during the
“Import Motorola XML File” process.
Refers to X2 type of TDMA
MSU Mode.
TDMA Ph2
Read Only
This field is extracted during the
“Import Motorola XML File” process.
Refers to Phase 2 type of
TDMA MSU Mode
