FutureCall FC-3110, User Manual

Page: 12 / 14

LCD displays
BABYCALL OFF(ON)
, press
▲
or
▼
key to set it ON or OFF, press
MENU
key to
confirm. If you select ON, LCD displays
NO CODE
(or the preset baby call number, press
DEL
key to cancel), input baby call number using numerical key and press
MENU
key to confirm.
After set baby call function to ON state, pressing any key except
RD
key or picking up handset
will dial out the baby call number automatically.
When baby call function is ON state, you can still answer the incoming call.
NOTE:
1. If you don’t use the function, enter baby call function setting as per above operation
and select
BABYCALL OFF
, press
MENU
key to confirm.
2. Also you can press and hold
TALKING SET
button for 3 seconds at on-hook state, then press
TALKING SET
button three times again to enter to BABY CALL function.
¾ BABY LOCK function
At on-hook state, press and hold
RD
key for 3 seconds, LCD displays
BABYCALL OFF(ON)
,
then press
RD
key once to enter into BABY LOCK setting, and the LCD displays
BABYLOCK
OFF(ON)
, press
▲
or
▼
key to set it ON or OFF, then press
MENU
key to confirm.
After set baby lock function to ON state, pressing any number will invalid except emergency
numbers 110, 112, 119, 120, 800 and 999.
NOTE:
Also you can press and hold
TALKING SET
button for 3 seconds at on-hook state, then
press
TALKING SET
button four times again to enter to BABY LOCK function.
¾ OFF LINE function
At on-hook state, press and hold
RD
key for 3 seconds, LCD displays
BABYCALL OFF(ON)
,
then press
RD
key twice to enter into OFF LINE setting, and the LCD displays
OFFLINE
OFF(ON)
, press
▲
or
▼
key to set it ON or OFF, then press
MENU
key to confirm.
After you set OFF LINE function to ON state:
If you do not put the handset on the cradle properly when in handset mode, or you do not close /
turn off the speakerphone after your conversation has ended, the telephone will detect the busy
tone automatically, and return to standby mode this will allow the telephone to ring at the next
incoming call, if then you pick up the handset, the phone will continue to ring then you will need
to replace the handset back on the cradle and pick it up again to answer the call or if the
speakerphone was not closed you just press speakerphone key once or pick up the handset
to answer the call.
NOTE:
Also you can press and hold
TALKING SET
button for 3 seconds at on-hook state, then
press
TALKING SET
button five times again to enter to OFF LINE function.
LOW BATTERY DETECTION
When the voltage is lower than 3.9V, LCD displays a battery icon to remind the user to replace
the batteries.
11