Future Stellato, User Manual

Page: 26 / 36

11 ANTI-TIPPERS
QSF: 390 – UM 1024404 REV03 08/20/13 26 Stellato
If the distance between the bottom of the anti-tipper
wheels and the ground/floor is not 1 ½ “ to 2”, adjust the
anti-tippers. Refer to ADJUSTING THE ANTI-TIPPERS in this
section of the manual.
Note: A 1 ½ “to 2” clearance between the bottom of the
anti-tipper wheels and the ground/floor MUST be
maintained at all times.
ADJUSTING THE ANTI-TIPPERS
1. Press the release buttons on the wheeled portion of the
anti-tipper and slide it up or down to achieve the 1 ½
“to 2” clearance.
2. Check to make sure that the release buttons are fully
engaged in adjustment holes.
NOTE: Refer to the following chart to ensure the correct
anti-tipper is installed in the wheelchair. Seat-to-floor
heights are approximate depending on front caster size
and type. Also note the anti-tippers come in various
bends for various height ratios.