Future Stellato, User Manual

Page: 25 / 36

11 ANTI-TIPPERS
QSF: 390 – UM 1024404 REV03 08/20/13 25 Stellato
much as the anti-tippers are an option for 0 degrees or 3
degrees on this wheelchair (you may order with or without
the anti-tippers), Future Mobility Healthcare Inc. strongly
recommends ordering the anti-tippers as a safeguard for the
wheelchair user.
Seat-to-floor angle of 6 degrees: if changing the seat-to-
floor angle to 6 degrees, anti-tippers MUST be ordered and
installed.
Anti-tippers MUST be fully engaged and release buttons
fully protruding out of adjustment holes.
Ensure both anti-tippers are adjusted to the same mounting
hole.
Installing Anti-Tippers
Press the release buttons IN and insert the anti-tippers with
the anti-tipper wheels pointing toward the ground/floor into
the rear frame tubing until the bottom release button locks
in place.
Measure the distance between the bottom of the anti-
tipper wheels and the ground/floor.
RELEASE BUTTON
Figure 15: Anti Tippers Adjustment Criteria
STELLATO
Seat to Floor
Height
Anti-Tippers
13.25” – 14.5” Small Anti-tip assembly
(1003816)
15” – 16.5” Medium Anti-tip assembly
(1006351)
17” – 19.0” Large Anti-tip assembly
(1003815)