Future Orion III, Owner'S Manual

Page: 45 / 52

WC ORION III ENGLISH CDN 1230 REV01.DOCX 45 ORION III
GENERAL MAINTENANCE
1. Maintaining your chair in good working order will keep it
functioning properly and help extend the working life of the
chair.
2. Clean your chair often.
3. Make sure to replace worn or damaged parts as soon as
possible to prevent future injury.
4. It is recommended to have any work done on the chair by
an authorized dealer.
5. Follow the safety inspection checklist chart for optimum
performance.
6. We recommend that once a year to have a complete
inspection, service and safety check of your chair by an
authorized dealer.
WARNING
Failing to follow these recommendations could lead to possible
injury.
SERVICE AND REPAIR
1. Please contact the dealership or supplier from where the
wheelchair was purchased for service and moderate repair.
2. In some circumstances, it may be necessary to return your
wheelchair to Future Mobility for repairs.
3. Contact Future Mobility directly by telephone, fax, or e-mail
to obtain information regarding repair at Future Mobility
facilities.
4. You will be asked by the Customer Service Representative
for the serial number that is affixed to the wheelchair.
5. If any of the following conditions are observed, the
wheelchair must be serviced at Future Mobility:
a. Any part of the frame is cracked or broken
b. Any weld is cracked or broken
6. For safe and secure shipping, the wheelchair must be
placed in a suitable carton, or fastened to a pallet, to
ensure it does not sustain damage during shipping. Contact
Future Mobility to receive specific instructions for
packaging and shipping your wheelchair. Alternatively,
Future Mobility may arrange for pick-up.
CLEANING YOUR CHAIR
1. Cleaning your Seat and Back
a. Remove the outer and inner cover if required and
hand wash with a small amount of detergent.
b. Hang to dry the covers, do not machine dry or
wring out.
c. Use multipurpose disinfectant to spray seat, scrub
with soft brush if needed.
d. Test an inconspicuous area first for color-fastness.
e.
DO NOT USE HOT AIR FOR DRYING.
f. DO NOT IMMERSE the cushion or back foam in
water or cleaning solution.
g. Some color leeching from the cover onto the foam
is normal and cannot be washed out.
2. Paint Finish
a. Clean the painted surfaces with mild soap at least
once a month
b. Protect the paint with a coat of non-abrasive auto
wax every three months.
3. Axles and Pivot Joints