51885200.DOC
11/23
• Master-control
• Flash-buttos per channel
• Full On and Stand By function
e.g. for DMX In-function of Wizard-1024
software
4.2 Overview
Overview on the control elements
1
2
3
4
5
6
7
1. FLASH-BUTTONS
2. CHANNEL FADERS
3. KANAL-LEDs
4. FULL ON-BUTTON
5. STANDBY-BUTTON
6. MASTER FADER
7. DISPLAY
Rear panel:
POWER
ON
OFF
Vor Gebrauch Anleitung lesen. Gerät vor Feuchtigkeit schützen! Gefahr eines
elektrischen Schlages, niemals das Gerät öffnen! Im Geräteinnern befinden
sich keine zu wartenden Teile. Wartungs und Servicearbeiten nur durch autori-
sierten Fachhandel!
Read user manual before use. Keep away from moisture! Risk of electric shock,
never open the housing! There are no serviceable parts inside the device. Main-
tenance and service operations only by authorized dealers.
Type: WIZARD Wing
Power supply: 12-20 V DC, 500 mA
Power consumption: 6 W
Future
light
R
www.futurelight.com
1
2
3
1. POWER SWITCH
2. DC IN SOCKET
3. DMX OUTPUT SOCKET
5. SETUP
5.1 Installation
Install the device on a plane surface or install it in rack.
Rack-installation: This device is built for 19" racks (483 mm). The rack you use should be a Double-Door-
Rack where you can open the frontpanel and the rear panel. The rack should be provided with a cooling fan.
When mounting the controller into the rack, please make sure that there is enough space around the device
so that the heated air can be passed on. Steady overheating will damage your device.
You can fix the controller with four screws M6 in the rack.
