18
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
Linsen Gobo Farbwechsler
Lüfter
Linse Spiegel
6. Maintenance and cleaning
It is absolutely essential that the projector is kept clean and that dust, dirt and smoke fluid residues must not build
up on or within the projector. If this happens, the light output from the projector will be significantly reduced.
Regular cleaning will not only ensure the maximum light output, but will also allow the projector to function reliably
throughout its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no
circumstances should alcohol or solvents be used!
DANGER !
Disconnect from the mains before commencing any maintenance work.
The front mirror and objective lens will require a weekly
cleaning as smoke fluid has a tendency to build up
residues, reducing the light output very quickly. The
cooling fan should be cleaned monthly.
The gobos may be cleaned with a soft brush.The inte-
rior of the projector should be cleaned at least annu-
ally using a vacuum cleaner or air jet.
The dichroic colour filters, the gobo wheel and the in-
ternal lenses should be cleaned monthly.
7. Appendix
We hope you will enjoy your Scan D-200 / H-250 MKS. We can assure you, that if you follow the instructions given
in this manual, you will enjoy this device for a long period of time.If you should have further questions, do not
hesitate to contact your local dealer.
Please note:
All specifications are subject to change withour prior notice.
Errors and omissions excepted.
5/97 ©
(QJOLVK
Summary of Contents for Scan D-200
Page 1: ...1...
