00025949.DOC, Version 1.4
49/103
• Press
[EXIT]
in order to return to the main menu.
- Wheel adjustment
With this function, you can calibrate and adjust the effect wheels to their correct positions.
• Select
“WHEL”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“CODE”
.
• Press
[MODE/ENTER]
, the display shows
“CXXX”
.
• Enter the password
“C050”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
• Press
[MODE/ENTER]
, the display shows
“CH-XX”
, “X” stands for the channel number.
• Select the desired channel by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“XXXX”
, “X” stands for the calibration value.
• Adjust the desired calibration value between –128 and 127 by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Main menu 4
• Press
[MODE/ENTER]
to enter the main menu (display flashing).
• Press
[UP]
or
[DN]
to select
“TIME”
.
- Fixture running time
With this function you can display the running time of the device.
• Select
“MATI”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“XXXX”
, “X“ stands for the number of hours.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Lamp running time
With this function you can display the running time of the lamp.
• Select
“LATI”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“XXXX”
, “X“ stands for the number of hours.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Clear lamp time
• With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp.
• Select
“CLLT”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
or
[DN]
to select
“ON”
if you wish to enable this function or
“OFF”
if you don’t.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Main menu 5
• Press
[MODE/ENTER]
to enter the main menu (display flashing).
• Press
[UP]
to select
“EDIT”
.
