00025949.DOC, Version 1.4
47/103
rpan
- Pan Reverse
With this function you can reverse the Pan-movement.
• Select
“RPAN”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
rtil
- Tilt Reverse
With this function you can reverse the Tilt-movement.
• Select
“RTIL”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Switch 16 bit/8 bit
With this function you can switch the device from 16 bit to 8 bit resolution.
• Select
“16BI”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
or
[DN]
to select
“ON”
in order to set 16 bit, or
“OFF”
in order to set 8 bit. The channels
PAN Fine and TILT Fine will be disabled.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Select PAN-degree
With this function you can delay the lamp ignition.
• Select
"DEGR"
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
to confirm; the display shows
“630”
.
• Press
[[UP]
or
[DN]
to select the desired delgree between
"630"
and
"540"
.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Mic sensitivity
With this function, you can select the desired microphone sensitivity between 0 % and 99 %.
• Select
"MIC"
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
to confirm; the display shows
“M-70”
.
• Press
[UP]
to select the desired sensitivity.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Auto run if no DMX
With this function, you can set the device to auto run if no DMX-signal.
• Select
“AUTO”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Music control if no DMX
With this function, you can set the device to sound-controlled program-run if no DMX-signal.
• Select
“SOUN”
by pressing
[UP]
or
[DN]
.
• Press
[MODE/ENTER]
, the display shows
“ON”
or
“OFF”
.
• Press
[UP]
to select
“ON”
if you wish to enable this function or
[DN]
to select
“OFF”
if you don’t.
• Press
[MODE/ENTER]
to confirm.
• Press
[EXIT]
in order to return to the main menu.
- Adjust ventilation fan
With this function, you can adjust the ventilation fan.
• Select
"FANS"
by pressing
[UP]
or
[DN]
.
