Future light DMB-150, User Manual

Page: 45 / 52

00078029.DOC, Version 1.1 45/52
Set
Users
User Mode

Standard
Extended
Basic-8bit
Basic-16bit
User
User’s mode to
change channel
numbers
Edit User 
Max Channel = XX
PAN = CH01 ...
Preset User modes
Calibration

--Password--
Color ... Password=XXX
Color =XXX ...
Wheel adjustment
to standard position
password „050“
Fixture ID

Name
--Password--
PID Code
Name
password „050
Set PID Code of RDM
Reload Default
Basic Reload

Program Reload

--Password--
Private Reload

All Reload
ON/OFF
ON/OFF
XXX
ON/OFF
ON/OFF Basic Reload
Program Reload
password „050“
Private Reload
All Reload
Progra
m
Play

DMX receive Back to DMX mode
Slave receive
Slave 1, Slave 2,
Slave 3
Slave setting
Sequence Master/Alone
Auto program
Music Master/Alone
Music control
Select Chase

Chase Part 1
Chase Part 2
Chase Part 3 Chase 1- 8 Chase 1
Chase 1- 8 Chase 2
Chase 1- 8 Chase 3
Select programs to be
run
Edit Chase

Chase 1
:
Chase 8
Chase Test
Step 01 = SCXXX
Step 64 = SCXXX
Testing program
Program in loop
Save and exit
Edit Scenes

Edit scene 001
:
Edit scene 250
Pan,Tilt, ...
-- Fade Time --
-- Scene Time --
DMX Input
Save and
automatically return
manual scenes edit
Scenes Record ScXX=>ScXX Automat. scenes rec
Connect
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select
“DMX Address“
by pressing Up or Down.
• Press the Enter-button, adjust the DMX address by pressing Up or Down.
• Press the Enter-button to confirm.
Light
Max Temperature
With this function you can set the inside temperature at which the projector will automatically switch the LED
off. Press Up or Down to select the maximum inside temperature between 80 °C and 139 °C. Inside
temperatures below 90 °C are not critical. 90 °C and more should lead to the LED being switched off. Please
note that the outside temperature should not exceed 45 °C.
Information
Time information
Current
With this function, you can display the temporary running time of the device from the last power on. The
display shows “XXXX”, “X“ stands for the number of hours. The counter is reset after turning the device off.