00078029.DOC, Version 1.1
36/52
Screw the clamp via a M10 screw and nut onto the Omega-holder.
Insert the quick-lock fasteners of the Omega-holder into the respective holes on the bottom of
the device. Tighten the quick-lock fasteners fully clockwise.
DMX-512 connection / connection between fixtures
The wires must not come into contact with each other, otherwise
the fixtures will not work at all, or will not work properly.
Please note, the starting address depends upon which controller is being used.
Only use a DMX-cable and 5-pin XLR-plugs and connectors in order to connect the controller with the fixture
or one fixture with another.
