Fig. 7
1.
Be sure to keep the distance between the heater and floor, wall and so on at least
30cm as picture (Fig. 3).
2.
Use drill dimension paper to drill
top two holes (
Φ
8)
on the wall and put the
expansion screws in the holes as picture (Fig. 4).
3.
The hook racks are pre-assembled on the back of the heater, hang the top two
hook racks on the screws as picture (Fig. 5). Mark the two bottom hook rack’s
position on the wall and take away the heater, then drill
bottom two holes (
Φ
8)
on the wall and put expansion screw’s plastic cover in the holes as picture (Fig. 5).
4.
Hang the heater on the wall and put the expansion screws in the bottom two holes
as picture (Fig. 6).
For Stand
(Fig. 7)
1. Fit the foot onto the bottom of the
body.
2. Fasten the foot with 4 screws.
Fig. 5
Fig. 6
