9)
Open window function
The heater has open window function.
If you open a window widely in the space where the heater is located and the
temperature drop 2 or more than 2 in two minutes, a sensor will detect the sharp
drop in temperature. The heater will switch out automatically and show in
display.
The heater will be reignited automatically after 10 minutes. However you can
manually relight the radiator before the 10 minutes end by pressing
. The icon
disappears and show previous operation mode.
Default setting of open window function is closed.
Press and hold
button for 5 seconds, display show , then press
button to
open open window function, display show icon “ON” and flash for 15 seconds to
confirm automatically, or you can press
to confirm directly.
If open window function is opened, and you want to close, then press and hold
button for 5 seconds, display show , then press
button to close open window
function, display show icon “OF” and flash for 15 seconds to confirm automatically, or
you can press
to confirm directly.
10)
Resetting the heater
Turn off the heater's main switch.
Press and hold
while you turn on the heater's main switch.
11) Memory function
*The heater remembers free mode’s temperature settings and will automatically
return to the desired temperature after a power failure. But it can’t remember the
settings for day mode and night mode.
Maintenance
1.
For cleaning, always unplug the heater and leave it to cool.
2.
Wipe the heater regularly with a damp cloth and dry the surface before turning
on the heater again.
3.
The heater must be cleaned at least once a month during the heating season.
4.
Dust etc. should be removed with a soft cloth.
5.
The heater can be stored in a dry and clean place.
CAUTION! The heater should never be immersed in water.
Avoid using detergents to clean the heater.
Never let any water get inside the heater; this can be hazardous.
