manualshive.com logo in svg

Futek IPM650, Quick Start Manual, Page: 3 / 24

Share
Download
Futek IPM650 Quick Start Manual Download Page 3

3

Display Features . . . . . . . . . . . . . . . . . . . . . 4

Buttons .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   5

Connector Pin Configuration.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   6

Wiring Layout  . . . . . . . . . . . . . . . . . . . . . . 7

Profile Quick Setup (Calibration) .   .   .   .   .   .   .   .   .   .   .   .   .   9

TEDS and Channel Select . . . . . . . . . . . . . . . .11

Profile Lockout and LCD Settings . . . . . . . . . . . .12

Analog Output Quick Setup . . . . . . . . . . . . . . .13

Alarm and Relay Quick Setup . . . . . . . . . . . . . .14

Data Logging.   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .16

SENSIT Test and Measurement Software  . . . . . . . .18

Performance Review . . . . . . . . . . . . . . . . . . .20

Specifications  . . . . . . . . . . . . . . . . . . . . . .21

Setting Sampling rate and number of digits .   .   .   .   .   .   .22

Troubleshooting . . . . . . . . . . . . . . . . . . . . .23

Table of Contents

Summary of Contents for IPM650

























Reviews:

No comments