10
The decimal point can be moved by selecting it first and
turning it into a number, and then selecting another
digit to change it into a decimal point.
Sensitivity (+) must be entered. If only one direction is
selected, then sensitivity (+) will be applied to both directions
of output or negative direction output.
Sensitivity is the sensor’s output level, such as mV/V output,
and is found on the calibration certificate.
Pressing back without saving will prompt to exit without
saving. Enter can be used for Yes, and Back for No.
Current profiles cannot be set up manually and must be set up
using the Live Calibration feature in the profile setup.
Full bridge sensor type is for mV/V output sensors. Voltage
output and current output are for amplified inputs to the
IPM650.
Online sensor calibration data may be available by sensor
serial number at
http://www.futek.com/CalibrationData.aspx
to assist in finding your sensor’s output or sensitivity.
TIPS FOR SETTING UP A PROFILE
A full profile setup guide can be found on our
FUTEK website at:
http://www.futek.com/files/
Pdf/QuickStartGuide/IPM650ProfileSetup.pdf