169
＜
Data
＞
&XUYHVHWWLQJRSHUDWLRQ
This section describes the setting procedure of curves which are used with the AFR function and each mixing
function.
Curve type selection
When the curve type select button on the mixing function screen or other screen is touched, the setup screen
shown below is called.
ŏ5HWXUQWRRULJLQDOVHWXS
screen of original function
Curve type selection
1. Touch the button of the curve type you want to use.
*The curve type changes and the display returns to the original screen.
retrieved from the previous setting data when
changing the curve type.
At the curve type changes, the dialogue box asks
whether the current curve is reset or inherited. The
default curve is used when selecting the Yes button
on the con
¿
rmation dialogue.
When curve type is changed:
The curve shape is inherited when the curve type
is changed.
([DPSOH&KDQJHVIURP(;3WR/LQHFXUYHW\SH
Changed to line or spline mode, the curve is
retrieved as 17 points curve.
The Rate A and Rate B are inherited on the
linear, EXP1, EXP2 and VTR.
Other data except Rate A and Rate B are
