22
Set the control throws
● Use a ruler, an inclinometer, or a
protractor to accurately measure and
set the control throw of each control
surface in left/right or up/ down
same throw.
● Make sure that the surface is not binding. In case of binding reduce the travel adjustment in the TX.
16
Do the first flight in low rate.
Ŷ+LJK5DWHVDUHDJJUHVVLYHVRHDVHLQWRXVLQJORZUDWHVIRUJHQHUDOÀ\LQJ
Sky Leaf Tip
It is best to utilize the dual rate function of the transmitter for the best
control. A flight is usually done in low rate. For 3D Flight, it is best
to use high rates. When using high rates, use (-) EXPO. That will help
control the model more smoothly around neutral stick position's.
Ṽ
Low Rate:
ẅί
D/R
ὸ
Aileron : 40% Elevator : 35% Rudder : 130%
ẅẅẅẅẅẅẅẅẅẅ
ί
EXPO
ὸ
Aileron : -45% Elevator : -25% Rudder : -40%
Ṽ
High Rate:
ẅί
D/R
ὸ
Aileron : 100% Elevator : 125% Rudder : 130%
ẅẅẅẅẅẅẅẅẅẅ
ί
EXPO
ὸ
Aileron : -80% Elevator : -80% Rudder : -40%
