
13
6
Horizontal stabilizer
5
1
1
< Elevator >
● Hinge
● Hinge
3
2
< Elevator >
Install it firmly so as not to come off by vibration or
wind pressure.
Ŷ ,I WKH HOHYDWRU GLVHQJDJHV GXULQJ IOLJKW LW ZLOO EH
XQFRQWUROODEOHDQGZLOOFUDVK
4
5
●
2-Control horns
< Elevator bottom side >
●
Horn guide
Grease
1. Instal the Elevators
<
Horizontal stabilizer
>
ŗŐūƌƑƊƈƖŃƌƑƖƈƕƗŃƓƒƌƑƗ
● Grease up to the moving part of
the hinge.
● Do not allow grease to adhere to
the insertion part.
● Attach the rudder to the
hinges
with
Epoxy glue
.
!
Epoxy adhesive should not
adhere to moving parts.
!
Do not allow grease to adhere
to the insertion part.
!
Attention to the axial
direction of the hinge.
!
Epoxy adhesive should not
adhere to moving parts.
●
Move the elevator
after drying. Check that the
rudder is securely attached.
ŰƒƙƈŃƌƗŃƖƈƙƈƕƄƏŃƗƌƐƈƖő
Clearance is needed.
No Clearance
● After the adhesion has dried, pour a suitable amount
of
Epoxy glue
into the hinge hole of the Horizontal
stabilizer and insert
Elevator
into the
wing
.
آ ťƈŃƆƄƕƈƉƘƏŃƑƒƗŃƗƒŃƐƌƖƗƄƎƈŃƗƋƈŃƉƕƒƑƗŃƖƌƇƈŃƄƑƇŃ
ƅƒƗƗƒƐŃƖƌƇƈő
ųƘƖƋŃƌƑ
●
Ruff up
the bottom of the
control horn with sandpaper to
help the glue stick to the horn.
● Adhesive with
Epoxy
glue
● Horn guide Also
apply
Epoxy
glue
on the back side.
●
Cut the film
of horn
guide attachment part
and peel off.
● Attach the
Elevator servos
and
Control horns
to
the other Horizontal stabilizer by the same work.