77
Setting up dual elevator servos
1. Turn the ALVATR function ON by pressing the (+)
key ("ON" displayed). Turn off (INH) the function with
the (-) key.
To SNP
function
To ELEVON function
Setting
items
AIL3
AIL4
ELE2
ELE1
Data input keys
These keys are used to move
through the five submenus in
the ALVATR function.
2. CH2 tail servo aileron travel
adjustment (AIL3): enter the desired
value with the (+)/(-) keys.
3. CH8 tail servo aileron travel
adjustment (AIL4): adjust and set
the value as before.
4. CH8 tail servo elevator rate
adjustment (ELE2)
Adjust the rate with the (+)/(-) keys.
5. CH2 tail servo elevator rate
adjustment (ELE1)
• Return to the default by pressing
the (+) and (-) keys simultaneously.
Servo travel
Range: -100 to +100%
(Initial values set to
AIL3 = -50%
AIL4 = -50%
ELE2 = -100%
ELE1 = +100%)
When you move
the control below
CH2 servo
functions as
CH8 servo
functions as
Aileron stick*
AIL3
AIL4
Elevator stick
ELE1
ELE2
Be sure to move the elevator and aileron sticks continually while
checking the servo motions. If a large value of travel is specified,
when the aileron and elevator sticks are moved at the same time,
the servo travel may be large, and controls may bind or run out of
travel.
*If you want elevator function only,
set the "AIL3" and "AIL4" travel
rates to 0.
This function may not be used by the T8UH transmitter.
To TH-DLY
function
To ALVATR function
Function name display
