67
The Idle Down function lowers the engine idling speed when either the airbrake
switch (SW C) or landing gear switch (SW G) is activated. This function may be
used whenever you wish to raise the engine idling speed to prevent the engine from
stalling, and to lower the engine idling speed for landing.
Setting the IDL-DN function
1. Activate the IDL-DN
by pressing the (+) key
("ON" or "OFF" will be displayed). You may turn off the
function by pressing the (-) key (INH will be displayed).
To F/S
function
To EXP function
Range: 0 - 40%.
Initial value = 0%
*The blinking item is what is
being set.
Data input keys
These keys are used to move
through items 1-3 in this menu.
Currently set
switch
2. Idle down throttle
Adjust the idle down position with
the (+)/(-) keys.
• If you're unhappy with your
setting, you may return to the
default value by pressing the (+)
and (-) keys simultaneously.
3. Select the desired Idle-down switch with the (+) and (-) keys.
Switch name and direction display
(SW-C C/DN, SW-G DOWN, SW-G UP)
• The "SW-C C/DN" display indicates that both the switch C
CENTER and DOWN positions activate the IDL-DN
function to lower the idling speed.
• The "SW-G DOWN" display indicates that the G switch in
the DOWN position activates the IDL-DN function.
• The "SW-G UP" display indicates that the G switch in its
UP position activates the IDL-DN function.
Normally, a value of about 10- 20% is suitable. Secure the fuselage,
and while running the engine, set the throttle stick to idle. Adjust the
idle down rate while flipping the switch ON and OFF.
AIL2 outputs the second aileron to channel 5. (In the "ACRO" and "GLID1FLP"
modes.) A mode that outputs second aileron to channel 6 or 7 ("6or7"), the same as
normal, or a mode that outputs second aileron to channels 5 and 6 ("5&6") can be
selected. When using the flaperon or aileron differential function with a 5-channel
receiver, select the "5&6" mode.
SETTING METHOD
To TRAINR function
In the PARA function.
To REVERS function
AIL2 output channel
Setting:
Select the output channel
with the (+)/(-) keys.
Data input keys
These keys are used to move through submenus
The default setting is “6or7”.
Current setting display
(“6or7” or “5&6”)
