11
●
Connectors
"#(3ERVO"ATTERYCONNECTOR
#(3ERVO
4HROTTLE3ERVO#(
3TEERING3ERVO#(
!BATTERYCANCONNECTANYSLOT
●
Built-in antenna
T h e
R 2 1 4 G F - E
r e c e i v e r i s
d e s i g n e d t o b e
used
only for EP
Car models
.
Receiver R214GF-E
Servo S3003
Link Switch
LED
Servo Horn
to Receiver
Mounting
Flange

WARNING
Keep the receiver as far away from the motor, ESC and other noise sources as
possible.
E.S.C. MC231CR
Motor connector
Connects to the motor.
(Orange) is positive. (Blue) is negative.
If the motor rotates in the wrong
direction, interchange the connections of
this connector.
NiCd/NiMH battery connector
Connects to the running NiCd/NiMH battery.
(Red) is positive. (Black) is negative.
Receiver connector
Connects to the receiver throttle channel.
Miniature
s
crewdriver
Accessory. Use to press the
pushbutton switch.
Checker LED
Power
s
witch
Pu
s
hbutton
s
witch
MC231CR
(Orange)
(Blue)
(Black)
(Red)
Applicable motor
s
(Number of turns is criteria.)
•Use the MC231CR with a motor with 23T or more turns.
*If a motor with a number of turns smaller than the above is used, the heat
protector and overcurrent protection circuit may operate. The number of turns
of the motor is only one criteria. Depending on the running conditions, the
protection circuit may operate even if the condition above is satisfied.
NiCd/NiMH
battery 6~7 cells (7.2~8.4V)
