4
WARNING
CAREFULLY READ THE INSTALLATION,
OPERATING AND MAINTENANCE INSTRUCTIONS
BEFORE INSTALLING THIS APPLIANCE.
INCORRECT INSTALLATION, ADAPTATIONS OR
ALTERNATIONS COULD CAUSE DAMAGE TO
PROPERTY OR INJURY TO PERSONS. MALICIOUS
DAMAGE, DAMAGE DUE TO NEGLIGENCE, OR TO
FAILURE TO COMPLY WITH INSTRUCTIONS AND
REGULATIONS, OR TO INCORRECT CON-
NECTIONS OR UNAUTHORISED TAMPERING
INVALIDATE ANY WARRANTY AND RELIEVE THE
MANUFACTURER OF ALL LIABILITY.
1. Carefully read this instructions booklet, as it
contains important advice for safe installation,
operation and maintenance. Keep this booklet to
hand in a safe place for future reference by other
operators.
2. Installation should be carried out by qualified
engineers, in accordance with current regula-
tions and with the manufacturer’s instructions.
3. The appliance should only be used by persons
specifically trained in this operation.
4. Switch off the appliance in the event of failure or
malfunctioning.
Only have the appliance repaired by a service centre
authorised by the manufacturer and ask for original
spare parts.
A1
HANDLING
Use suitable means to move the appliance: a lift truck
or fork pallet trucks (the forks should reach more than
halfway beneath the appliance).
A2
UNPACKING
Fig. 1
Wear protective gloves to unpack.
Lift the appliance using a lift truck, remove the base
and position the appliance
Fig. 2
where it is to be installed.
Fig. 3
Remove the protective film and ensure that the
packaging material is disposed of correctly in
compliance with the regulations in force in the country
where the product is to be used.
A3
DISPOSAL
All the packaging materials are environment friendly.
They may be kept without danger, recycled or burned
in a special waste incineration plant. Recyclable plastic
components are marked as follows:
Wood and cardboard components may be disposed of
according to local regulations in force. Appliances that
have reached the end of their service life should be
suitably disposed of. The appliance should be
dismantled according to regulations in force. All metal
parts are in stainless steel (AISI 304) and are
removable. Plastic parts are marked with the symbol of
the material.
A
GENERAL RECOMMENDATIONS
polyethylene:
external wrapping film,
instruction bag.
polypropylene:
top packaging panels,
straps.
polystyrene
foam:
protective surround
elements.
PE
PP
PS
Summary of Contents for Novamatic GS G400
Page 2: ......
