When the T3 device is connected to the computer the device display lights up and shows a
message indicating that the device is connected to the computer.
To configure a T3 device or to download a recording you will now need to start the KOEO Sleep
SMART Process.
When you are done working with the T3 device, unplug the mini USB cable, insert the battery,
and close the battery compartment by
gently pressing
the lid towards the device, and then
sliding it back into position, towards the top of the device.
Inserting a Battery into the T3 Device
Before you start a recording you should make sure that the device has a new, fully charged AA
battery. To insert a new battery do the following:
1. Open the battery compartment by pressing down on the battery lid pin with the tool
provided, a pen, or similar tool and then slide the lid toward the bottom of the device (left
image).
2. Place one AA battery into the compartment aligning the battery poles as illustrated on
the back of the device (the positive (+) pole is toward the battery lid).
3. Close the battery compartment by
gently pressing
the lid toward the device while sliding
it up and back into position towards the top of the device. Make sure the lid is securely
closed.
2
