The T3 device is now configured for recording and the device and sensors may be applied to
the subject. Next:
● Remove the USB Cable from the T3 device
● Insert a new AA battery into the T3 device
● Close the battery lid
● Follow the instructions on “How to apply the sensors and the T3 device to the subject”
Following the acquisition of testing data using the T3 device, you will now proceed to
Upload T3
Data (Step 6)
. This task is to be completed only after the T3 test is complete.
Upon completion of the T3 test in Sleep SMART, the data must be uploaded to the scoring
teams for analysis. To do this:
● Open the battery door of the T3 Device
● Remove the AA battery and discard appropriately
● Connect the mini USB cable to the T3 device
Step 6: Upload T3 Task in KOEO
Click on Tasks at the Left of the screen
(Arrow #1)
Click on Upload T3 Data task in KOEO
(Arrow #2)
● Click on underlined
Upload T3 Data
(Arrow #3)
● Click on Open KOEO Interactive Tool (KIT)
(Arrow #4)
6
