13
PAIRED NOTIFICATION DISPLAY
When the Bluetooth device is paired with the RV-CD850BT, the
Bluetooth Icon will appear on the LCD display. This should
occur whenever you use the system and the paired device is in
range.
BLUETOOTH A2DP AUDIO STREAMING
If the connected Bluetooth device supports Advanced
čÕ`ÃÌÀLÕÌ*ÀwičÓ*®]ÞÕV>ÃÌiÌÕÃV
stored on the device through the head unit.
BASIC OPERATION
1. Ensure the Bluetooth device is paired with the head
unit.
2. Press the
SOURCE
button repeatedly to select the BT
AUDIO source.
3. Open the music player on the device and select & play
your desired track(s)
ADVANCED OPERATION
If the device also supports Audio Video Remote Control
*Àwič6,*®]ÞÕV>VÌÀL>ÃV«>ÞL>VvÕVÌÃ
(eg iPod music) via the head unit.
1. Follow steps 1 & 2 above as per Basic Operation
2. Press to start playback. Press again to pause.
3. Press either to advance to the next track, or
return to the beginning of the track.
4. Depending on the device, volume adjustment may be
possible from the device. Please ensure it is not set too
high to avoid distortion.
NOTE
ID3 type information – Title, Artist, Album etc is not available on
the LCD screen in Bluetooth A2DP mode.
DISCONNECTING THE BLUETOOTH DEVICE
1. If the Bluetooth device is paired and you want to
disconnect it from the RV-CD850BT, press
MENU
to
enter the System Menu. Keep pressing until [DISCONN
>
]
is displayed.
2. Press
ENTER
on the Encoder Volume Control.
[WAITING] will be displayed on the LCD display,
followed by [DISCONNECTED] when completed.
RE-CONNECTING THE BLUETOOTH DEVICE
Once paired, the phone should re-connect automatically
every time you use the system. If not, or you have
previously disconnected the phone, you can manually re-
connect it using the following steps.
1. Press
MENU
to enter the system menu.
Keep pressing until [CONNECT
>
] is displayed.
2. Press
ENTER
on the Encoder Volume Control.
[WAITING] will be displayed on the LCD display,
followed by [CONNECTED] when completed.
More information https://www.caravansplus.com.au
