17
TROUBLESHOOTING
Before going through the check list, please check the
wiring connection diagram. If problems persist, please
consult your supplier.
No power or no sound
• Ignition is not on. Turn the Ignition to “accessories”
• Unit is off - press the power button to activate the unit.
• Fuse is blown. Please replace the fuse.
• If the speakers are connected to the speaker outputs,
check the speaker connections.
UvÌ iëi>iÀÃ>ÀiViVÌi`Ì>«wiÀÉÃÞ]V iV
that they are operating correctly.
• If the above solutions do not help, please press the RESET
button.
Noise in radio broadcasts
• Signals are too weak, turn LOC off.
• Check the antenna connection or replace the antenna if
necessary.
Unable to Eject Disc
• Press & hold the Eject button .
Display shows ERR-1
U / i 1- À - `iÛVi V>Ì Li Ài>`° wÀ Ì i
`iÛViÃvÀ>ÌÌi`Ìč/ÎÓ7`ÜîwiÃÞÃÌi°
Display shows ERR-3
• USB/SD data error. Check to ensure only MP3 or WMA
wiÃ>Ài>`i`Ì iÃÌÀ>}i`iÛVið
Display shows ERR-5
• Communication error. The USB/SD device could be
damaged or corrupted. Please re-format (Fat32 only) or
try a different device.
Bluetooth
• Depending on the Bluetooth version of the device, some
Bluetooth devices may not be able to connect with this head
unit.
• As Bluetooth is a wireless communication protocol, there
may be times where connection between the device and
head unit is lost or disrupted due to interference or other
signal quality disruptions.
• A2DP playback may be interrupted or playback speed
may vary, or playback may not resume automatically after
making or receiving a call.
• Some Bluetooth enabled mobile phones may only
stream music data. In this case the resultant playback
quality through the head unit will be low.
• Music or noise may be heard for a moment if music
streaming is taking place
• There may be occurrences where music cannot be
played through the head unit even though music is being
played back on the mobile phone.
More information https://www.caravansplus.com.au
