Fusion FusionServer 2298 V5 Manual Download Page 62 | Manualshive

Page: 62 / 89

background image

FusionServer 2298 V5 Server
Technical White Paper

8 Safety Instructions

2022-06-25

62

Figure 8-3

Wearing an ESD wrist strap

⚫

Exercise caution when using tools.

⚫

If the installation position of the device is higher than the shoulders of the installation
personnel, use a vehicle such as a lift to facilitate installation. Prevent the equipment
from falling down and causing personal injury or damage to the equipment.

⚫

The equipment is powered by high-voltage power sources. Direct or indirect contact
(especially through damp objects) with high-voltage power sources may result in serious
injury or death.

⚫

Ground the equipment before powering it on. Otherwise, personal injury may be caused
by high electricity leakage.

⚫

When a ladder is used, ensure that another person holds the ladder steady to prevent
accidents.

⚫

When connecting, testing, or replacing an optical cable, do not look into the optical port
without eye protection.

Equipment Safety

⚫

Use the recommended power cables at all times.

⚫

Use power cables only for dedicated servers. Do not use them for other devices.

⚫

Before operating equipment, wear ESD clothes and gloves to prevent
electrostatic-sensitive devices from being damaged by ESD.

⚫

When moving a device, hold the bottom of the device. Do not hold the handles of the
installed modules, such as the PSUs, fan modules, drives, and the mainboard. Handle the
equipment with care.

⚫

Exercise caution when using tools that could cause personal injury.

⚫

If the device is configured with active and standby PSUs, connect power cables of active
and standby PSUs to different power distribution units (PDUs) to ensure reliable system
operating.

⚫

Ground the equipment before powering it on.

Transportation Precautions

Improper transportation may damage equipment. Contact the manufacturer for precautions
before attempting transportation.

Transportation precautions include but are not limited to:

⚫

The logistics company engaged to transport the device must be reliable and comply with
international standards for transporting electronics. Ensure that the equipment being

«
...
60
61
62
63
64
...
»

Summary of Contents for FusionServer 2298 V5


























































































Reviews:

No comments

Related manuals for FusionServer 2298 V5

BladeCenter HS23

Brand: IBM Pages: 28

x3800 - System - 8865

Brand: IBM Pages: 104

Eserver 345 Series

Brand: IBM Pages: 70

x3105 - System - 4347

Brand: IBM Pages: 130

System x3650 Type 7979

Brand: IBM Pages: 194

Brand: Ekselans Pages: 37

Brand: Black Box Pages: 60

LANTIME M300/MGR

Brand: Meinberg Pages: 5

Brand: Pepperl+Fuchs Pages: 28

SyncServer S100

Brand: Symmetricom Pages: 166

Brand: ICP DAS USA Pages: 9

Brand: AirLive Pages: 133

Brand: W&T Pages: 79

SC835BTQ - R1K28B

Brand: Supero Pages: 86

FatTwin F517H6-FT

Brand: Supero Pages: 130

Brand: easyRAID Pages: 34

KEPServerEX OPC

Brand: HORNER Pages: 4

Brand: Oracle Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands