16
16
17
17
NUT(5MM)
NUT(5MM)
FASTEN THIS END TO SECURE PART OF DASHBOARD.
DRIL HOLE IF NECESSARY.
MOUNTING SLEEVE
SCREW STUD
CAUTION:
FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE MOUNTED
WITHIN 20' OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS
LIMITATION.
REMOVAL TOOLS
BEND BOTTOM TABS
DOWNWARD
20' MAX
FRONT PANEL
SIDE VIEW
OF
CHASSIS
DETACHABLE
FRONT PANEL
BEND TOP
TABS UPWARD
PERFORATED STRAP
FASTEN THIS END TO SCREW STUD ON
REAR OF CHASSIS
SCREW (5MM)
Dashboard Installation
CAUTION! :
The rear of the unit must be supported to prevent damage to the dash and/or
improper operation due to vibration.
AUX OPERATION
Aux Connect
Connect an audio source to the AUX cable in the rear panel.
Aux Mode Selection
Press the SOURCE button to select AUX mode.
Radio - CD - iPod - AUX
ADDITIONAL FUNCTIONS
Additional functions avaliable while CD/MP or iPod is playing
Intro Scan - Shuffle - Repeat Track - Repeat Folder
To activate additional functions when the CD is playing;
- Press and hold the joystick and the CD FUNCTIONS screen will appear
-
Select a function by using the joystick encoder, confirm your selection by pressing the
joystick
INSTALLATION GUIDE
1.
Disconnect the negative (-1 V) lead from your battery to avoid potential damage to
the unit.
.
Remove the detachable front panel and slide the mounting sleeve off the chassis using
the removal keys provided.
.
Insert the mounting sleeve into the mounting hole and bend the locating tabs out to
secure the frame into the dash.
4.
Ensure you follow the wiring diagram (see page 19). Incorrect
connections may cause the unit to malfunction or damage the vehicle’s electrical
system.
5.
After all wiring connections are completed attach the front panel to confirm operation.
6.
Slide the unit into the mounting sleeve ensuring it locks into place and attach the
perforated support strap (supplied ) to the screw stud on the rear of the chassis using
the hex nut provided. Fasten the opposite end of the strap to a secure location.
