SMARTSTART User Guide 4
© Fusion Sport Pty Ltd, 2011, All Rights Reserved
SMARTSTART SCENARIOS
SMARTSTART is a highly versatile multifunctional device. For these various scenarios, specific settings must be
chosen during the set up process to ensure correct operation.
In each of the scenarios, there may be up to 3 stages in the software where configuration options apply. These
are –
1.
On the SCAN page, after discovering the device
2.
If a configuration screen appears when you select your team list for the session (RFID only mode);
and/or
3.
On the OPTIONS tab, after selecting your players and entering the session
SCAN Page:
select device mode
CONFIG Page
: RFID mode only
OPTIONS Tab
: depending on drill
SCENARIO 1: WIRELESS START GUN (ONE SMARTSTART FOR UP TO 8 LANES; PDA OR
HAND PLUNGER START))
In this scenario, SMARTSTART can be used at the start line as a high volume wireless start gun for 1-8 lanes of
timing, started by the SMARTSTART audio signal.
Notes for setup
Applicable protocols
Traffic Light Sprints
Hardware options
Connect hand start plunger button for manual
start
Number of SMARTSTARTs
One only, for up to 8 lanes
SCAN Page Selection
S.START
Test Track Action
Not applicable
RFID config page
Not applicable
Options Tab (pictured
right)
•
Always choose “Light/Buzzer” for traffic
light start type
•
Tick “Start by SMARTSTART” for hand
plunger start (leave un-ticked for PDA driven
start)
