SMARTSTART User Guide 3
© Fusion Sport Pty Ltd, 2011, All Rights Reserved
QUICK START GUIDE
1.
Turn on your SMARTSTART unit by flicking the switch located on the
bottom of the unit. Once turned on, the green power LED will be
illuminated.
2.
Turn on the gates and other devices that you will use for the session
3.
Start your SMARTSPEED software with Grabba Sleeve connected (as for
a normal session) and Press “Start New Session”
4.
Press Scan
5.
Your SMARTSTART units will appear in the scan list. If the units do not
appear, please refer to the troubleshooting section below.
6.
A drop down list will appear next to the unit ID. Choose the appropriate
SMARTSTART function from the list, according to the scenarios outlined
below.
7.
Follow the software as you would for a normal session, selecting your
drill and performing the “test track” procedure. In some scenarios, your
SMARTSTART unit will be part of the test track procedure, in which
cases you will need to press the hand start switch, start pad, jump mat
or SMARTSHOXX unit at the appropriate stage of the test track.
8.
If the SMARTSTART is not used in the test track procedure, and you are
running multiple tracks (lanes), then after selecting your team list for
the session, you will be presented with the SMARTSTART configuration
screen. Configure your SMARTSTARTs to coincide with the respective
lanes by pressing the “Buzzer” button next to each unit, and ensuring it
is set up to work with the correct track.
9.
Press OK and then proceed to run your session as usual.
HARDWARE INPUT OPTIONS
SMARTSTART is equipped with two PS2 ports for various functions. Currently, only one port is active, and is
clearly labeled “INPUT”. The second port is currently unused but was included in the design for future
possibilities.
The following hardware can be connected to SMARTSTART –
•
Hand plunger button (included)
•
Hand starts pads
•
SMARTJUMP contact mats
•
SMARTSHOXX impact/vibration triggers
The scenarios for using these various hardware items are explained in the following scenarios.
