Setting up your Studio
Chapter 2
Studio Movie Server | Fusion Research
6
The Fusion Studio System is a Video Server that is capable of outputting a
single stream of video. The Studio is a networked based product and requires
Internet access to be able to catalog movies; it also uses the network to
distribute another Studio if added or a storage device such as a NAS drive.
It is important to have a network and Internet access available
when first setting up the Studio to load movies and setup the
system.
Before powering up:
Make sure that the server is connected to your network prior to powering the
unit; it will not properly launch all of its services without this connection.
Network Cat-5 cable plugged in viable network
Even if you intend to run the Studio with a control system,
use the Fusion remote for initial setup and testing.
