Chapter 2
Setting up your Studio
11
Fusion Research | Studio Movie Server
When setting the static IP of a system, you
must make sure that the address is outside
the range of the router‟s DHCP settings.
For example; if the router‟s range in this
example is 192.168.1.100 to 192.168.1.150,
you would want to set the last number
either below 100 or above 150.
The default gateway is typically the router‟s
address as is the DNS setting.
You must have a default gateway & DNS
setting
configured for the unit to work correctly.
Set Screen Options:
Include setting the output resolution
(720p, 1080i or 1080p),
You may reset video to 720p at anytime by pressing and holding the “exit”
key for 10 seconds this can be helpful if the incorrect resolution is selected
and you no longer have a video output to view.
Unit must be re-booted for resolution change to take effect.
When using the Fusion component adapter (FR-COM), only use 720p or
1080i (typically displays cannot handle 1080p component)
Setting IP Address:
Fusion products ship with IP settings set to DHCP for initial ease of installation
and setup, we do however recommend that you set all Fusion components to
static IP addresses for greatest reliability.
It is import to know your router‟s IP address as well as its DHCP range, which is
the series of numbers or IP addresses that the router will assign all devices on
its network that are set to DHCP. See the example below for a correctly
configured IP setting.
When operating the system, if you cannot connect to the online movie
database the likely problem will be that you do not have the default gateway
or DNS settings properly entered.
