Setting up your Studio
Chapter 2
Studio Movie Server | Fusion Research
10
Setting Rating:
You can set a rating limit on any Fusion unit (zone) by selecting the maximum
rating shown in the setup section under “Set Video Options” as seen below.
When a rating is selected (for example the rating “PG-13”) once saved, no
movies with a rating above PG-13 will be seen in the interface in that
particular zone. The default setting is “NR”, which has no restrictions and
allows all movies to be shown.
You can unlock any zone that has a rating limit on it by bringing up the
“Menu” button on your remote or touch panel, or by selecting the DVD Menu
key on the Fusion remote.
Navigate down to “Rating Override” to open a password
window as seen below to override the rating limit and
allow all movies to be shown in the zone. The rating
override will stay active for a period of 30 minutes, after
which the system will revert back to its original rating limit.
The default password is
“4711”
, and can only be changed by Fusion
personnel; this can easily be done remotely by calling into support and
requesting the change (925) 217-1233.
Menu window shown has many additional functions
To bring up on
screen menu select
this key. Also the
“Menu” key will work
on most control
systems.
