19
4 At the terminal emulator, press the [Enter] key. As a result, MainMenu (shown
in step 3 in sub-section 7-3) shows up.
5 Through MainMenu, perform Basic Settings as explained in sub-section 7-5.
Also, perform In-depth Settings continually unless In-depth Settings are
downloaded from the MORS server.
7-5 Settings on MainMenu
This sub-section explains how to conduct settings on MainMenu.
1 With MainMenu displayed, press [1] then [Enter], and “Configuration Menu”
displays:
2 From within the Configuration Menu", perform settings as shown in the following
examples.
NOTE: The items with "
(REQUIRED)
" are always required.
The items with "
(OPTIONAL)
" are required, depending on system
configuration.
"1. TCP/IP Configuration"
On “Configuration Menu,” press [1] (“TCP/IP Configuration Menu”) then
[Enter].
IP Address
(REQUIRED)
(Basic Setting)
EXAMPLE: Set to “
192.168.1.10
”.
(1) On “TCP/IP Configuration Menu,” press [1] then [Enter].
(2) On “IP Address (LAN),” press [1] then [Enter].
(3) Type “
192.168.1.10
” then press [Enter].
(4) “TCP/IP Configuration Menu” redisplays.
NOTE: If you want to return to “Configuration Menu” (“MainMenu,”) press [Esc] once
(twice).
Subnet Mask
(REQUIRED)
(Basic Setting)
EXAMPLE: Set to “
255.255.0.0
”.
(1) On “TCP/IP Configuration Menu,” press [2] then [Enter].
(2) On “Subnet Mask (LAN),” press [1] then [Enter].
(3) Type “
255.255.0.0
” then press [Enter].
(4) “TCP/IP Configuration Menu” redisplays.
NOTE: If you want to return to “Configuration Menu” (“MainMenu,”) press [Esc] once
(twice).
Summary of Contents for WN-701-W
Page 2: ......
Page 4: ...B THIS PAGE INTENTIONALLY BLANK ...
Page 12: ......
Page 41: ...29 UNIT mm SINGLE BAND ACCESS POINT WN 701 W ...