Furuno SCX-20, Operator'S Manual

Page: 13 / 86

1. INSTALLATION
1-3
4. Connect the antenna cable to the antenna unit connector.
Note: DO NOT apply the supplied adhesive to the four vent holes near the name
plate.
5. Wrap self-vulcanizing tape twice at the junction between connectors of the anten-
na unit and the antenna cable. Then wrap vinyl tape once over the self-vulcaniz-
ing tape for waterproofing.
Note: Wrap the tapes so as to cover both connectors of the antenna unit and the
antenna cable.
6. Adjust the direction of the antenna unit so the bow mark on its base is facing the
ship’s bow.
Note: When the antenna unit is placed on the platform, make sure that the plat-
form is not inclined.
Bow mark
Cable hole
ø25±2 mm Cable hole
ø25±2 mm
Bottom view of the antenna unit
Vent hole (four places)
Note: Do not apply the
adhesive here.
Vent hole (four places)
Note: Do not apply the
adhesive here.
Name plate Name plate
Self-vulcanizing tape
(Double layer)
Self-vulcanizing tape
(Double layer)
Connector of antenna unit
Vinyl tape
(Single layer)
Vinyl tape
(Single layer)