7. RC1840 Equipment Setup
7-4
7.3 DP-6 NBDP Terminal
Refer to the
Installation Manual, DP-6
7.3.1 General
1) Power up the Terminal and main Units.
2) Press the
[F6]
key, to enter the
System menu
.
3) Use the arrow keys to select
Change
.
4) Use the down arrow key to highlight
Self Test
.
5) Verify all test are OK and that the self-test prints out.
7.3.2 ID Codes
1) Press the
[F5]
key, to enter the
Station menu
.
2) Press the key to select the
ID
to be entered:
6: Group ID Entry (4/5 digit)
7: Group ID Entry (9 digit)
8: Select ID Entry (4/5 digit)
9: Select ID Entry (9 digit)
(If an incorrect entry is made, refer to the
Dealers Manual
, Pg. 1)
7.3.3 Answerback Code
1) Press the
[F5]
key, to enter the
Station menu
.
2) Press the
[5]
key to select
Answerback Code Entry
.
3) Enter the Answerback code in the following format:
Example: 123456789 FURU X
This format is the 9 digit MMSI, 4 letters and X.
(
If an incorrect entry is made, refer to the
Dealers Manual
, Pg. 1)
