Furuno RC-1800F2 Series, Installation Manual

Page: 15 / 52

1-5
1.3 Mounting the Rack Console Table, Keyboard
1. Fasten right and left side table brackets to the console frame with six M5x20 bolts supplied as
accessories.
2. Lay the rack console table on the top of the table brackets.
3. Fasten the rack console table with five M6x15 flat head screws.
*=M5x20 bolt (w/spring washer and flat washer)
The keyboard for the terminal unit can be fastened to the tabletop.
1. Cut the rubber cap at the front of the console beneath the No.1/No.2 IC-215 or IB-583, and
pass the printer cable through it.
2. Unfasten two screws (M4x10) to detach the front cover.
Table Bracket
(Right)
Table Bracket
(Left)
Flat Head Screw
Bolt*
Bolt
Rack Console
Table
Flat Head
Screw
Flat head
Screw
Rubber cap
M6 bolt
M6 bolt
M4x10
screw
M4x10
screw
Front cover