6
Note on IF-NMEA2K2:
The
serial number (S/N) of IF-NMEA2K2
should be
5611 to 5650, 5791 and later
and the
version 01.07 or later is loaded
. The IF-NMEA2K2 with older serial numbers
CANNOT
detect the EVC even with the version 01.14 installed, showing the error
message [EVC INTERFACE HAS FAILED START UP TEST.] on the NAVpilot-700/711C
display. Make sure that the compatible serial numbers are used.
Reminder:
The Yanmar VC10 system
must
have an ID Key (Yanmar supply) to activate the
communications with an autopilot.
The ID Key must be installed for the Yanmar system to recognize an autopilot.
Refer to the NAVpilot-711C Installation manual for complete instructions.
Refer to the Yanmar VC10/JC10 Installation manual for installation settings.
--- END ---
-
All brand and product names are registered trademarks, trademarks or service marks of their respective holders.
