2. ADJUSTMENTS
15
[RGB], [DVI1/2] menu descriptions
*: When inputting VGA, SVGA or XGA, a circle may be displayed as an ellipse because the aspect
ratio differs. In this case, set [DISP MODE] to [NORMAL] on the [RGB], [DVI1], or [DVI2] menus.
A black bar appears on the top and bottom of the picture, but this is normal.
**: If the characters are not clear, adjust [PHASE] and [SHARPNESS].
Menu item
Function
Setting
H_SIZE (Only for
RGB menu)
Adjust the image size horizontally.
Horizontal size:
W
(narrow),
X
(wide)
Depending on in-
put signal
V_SIZE (Only for
RGB menu)
Adjust the image size vertically.
Vertical size:
W
(narrow),
X
(wide)
PHASE** (Only
for RGB menu)
Adjust the sample timing so that the flicker disappears and
the text is clear.
1 to 32
BRIGHTNESS
Adjust the red, green and blue color level at one time.
1 to 256
CONTRAST
Adjust the contrast level.
W
(darken),
X
(brighten)
1 to 64
H_POSITION
Move the image position horizontally.
W
(leftward),
X
(rightward)
1 to 99 (RGB),
1 to 50 (DVI1,
DVI2)
V_POSITION
Move the image position vertically.
W
(upward),
X
(downward)
1 to 40
R_LEVEL
Adjust the red color level.
W
(weaken),
X
(strengthen)
1 to 256
G_LEVEL
Adjust the green color level.
W
(weaken),
X
(strengthen)
1 to 256
B_LEVEL
Adjust the blue color level.
W
(weaken),
X
(strengthen)
1 to 256
TEMPERATURE Adjust the color temperature.
W
(strengthen the red color level),
X
(strengthen the blue color level)
5000 to 9300K
(Step is 100.)
B STRETCH
Emphasize the black color.
[OFF] (standard),
W
(weaken),
X
(strengthen)
[OFF], 1 to 10
W STRETCH
Emphasize the white color.
[OFF] (standard),
W
(weaken),
X
(strengthen)
[OFF], 1 to 10
DISP MODE*
Select the display method.
[FULL]: Show the input signal on entire screen.
[NORMAL]: Show the input signal with original aspect ratio.
[FULL],
[NORMAL]
SHARPNESS**
Sharpen the edges horizontally.
W
(soften characters and lines),
X
(sharpen characters and lines)
1 to 10
