1. MOUNTING, WIRING
7
1.5
Flush Mount, Fixed at Rear, with Hood
The flush mount, fixed at rear method allows you to attach a hood assembly OP26-6 (option) to
the monitor unit.
Hood assembly OP26-6 (Code No.: 001-080-930)
1. Use the flush mounting template (supplied) to make a cutout in the mounting location.
2. Fix the hood fixing plates 19 to the right and left sides of the monitor unit with the flat head
screws (6 pcs.).
3. Attach the F-mount hood packing 19 to the top and bottom brims. Then, attach the flush
mounting sponge V 19 to the right and left brims of the monitor unit from the rear side.
4. Follow steps 3 to 9 in section 1.4 to fix the monitor unit to the mounting location.
5. Loosely fix the knobs (4 pcs.) to the hood fixing plate 19 from inside the plate.
Name
Type
Code No.
Qty
Hood (19) Assembly
OP26-6-1
001-080-970
1
Flush Mounting Sponge V 19
26-005-3124
100-351-560-10
2
Hood Fixing Plate 19
26-005-3302
100-351-611-10
2
F-Mount Hood Packing 19
26-005-3305
100-351-620-10
2
Knob M4
03-163-2303
100-343-602-10
4
Flat Head Screw
M3x8
000-172-167-10
6
Flush Mounting Template
C42-00910
000-172-637-10
1
Hood Fixing Plate 19
Flat Head Screw
F-Mount Hood
Packing 19 for
top and bottom
Flush Mounting
Sponge V 19 for
left and right
