manualshive.com logo in svg

Furuno GP-1870F, Operator'S Manual

Share
Download
Furuno GP-1870F Operator'S Manual Download Page 147

12.  MAINTENANCE, TROUBLESHOOTING

12-5

12.5

How to Restore Defaults, Clear Memory

You may wish to restore default or user settings.

1. Open the [SYSTEM] menu then select [DEFAULT SETTINGS].

2. Select one of the following according to your objective.

[FACTORY DEFAULT]: Restore all default factory settings. User-saved items 
(waypoint, routes, etc.) are not erased.
[USER DEFAULT]: Restore the user settings saved with [SAVE USER DE-
FAULT]. User-saved items and user settings are not erased.
[SAVE USER DEFAULT]: Save all current user settings as default user settings. 
Waypoints, routes, etc. stored in the memory are not erased.
[CLEAR MEMORY]: All default factory and default user settings are erased. User-
saved items (waypoints, routes, etc.) are erased.

3. A message asks if you are sure to complete the action selected. The [YES] button 

is selected; press the 

ENT

 key to complete the action. Then, one of the following 

occurs:
[FACTORY DEFAULT]: The power is reset.
[USER DEFAULT]: The power is reset.
[SAVE USER DEFAULT]: User defaults are saved.
[CLEAR MEMORY]: The power is reset.

Summary of Contents for GP-1870F


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands