Furuno GP-1640F, Operator'S Manual, Page: 98 / 108

A-2
1
CONFIGURATION
SETUP NMEA PORT 1
SETUP NMEA/DGPS PORT 2
FORMAT
(NMEA0183Ver.1.5,
2.0)
LAT/LON FORMAT
(DD
°
MM.MM', DD
°
MM.MMM', DD
°
MM.MMMM)
FORMAT
(NMEA0183Ver.1.5, 2.0,
RTCM104EXTRN)
LAT/LON FORMAT
(DD
°
MM.MM', DD
°
MM.MMM', DD
°
MM.MMMM)
SELF TEST (MEMORY, I/O; KEYBOARD;TEST PATTERN)
DEMONSTRATION MODE
MEMORY/TRIP CLEAR
DOWNLOAD WAYPOINT/RTE TO PC
UPLOAD WAYPOINT/RTE FROM PC
SAVE DATA TO MEMORY CARD
LOAD DATA TO MEMORY CARD
SELECT SNTNC. soft key
(AAM, APB, BOD, BWC/BWR, GGA, GLL,
RMA, RMB, RMC, VTG, WPL, XTE, ZDA)
UPLOAD/DOWNLOAD DATA
SYSTEM MENU
WPT/RTE key
WAYPOINTS
ROUTES
LOG
CREATE VOYAGE BASED ROUTE
LOCAL LIST
ALPHA/NUMERIC LIST
WAYPOINT BY CURSOR
WAYPOINT BY RANGE & BEARING
ALARM key
AUDIO ALARM ( ON, OFF)
ARRIVAL ALARM (ON, OFF)
ANCHOR ALARM (ON, OFF)
PROXIMITY ALARM (ON, OFF)
XTE ALARM (ON, OFF)
SPEED ALARM (WITHIN, OVER/UNDER, OFF)
CLEAR PLOTTER MEMORY ( NO, YES)
CLEAR GPS MEMORY ( NO, YES)
CLEAR ALL MEMORY ( NO, YES)
TRIP METER RESET ( NO, YES)
SOUNDER SETUP OPTIONS
NOISE LIMITER ( OFF, NL1, NL2, NL3)
CLUTTER ( AUTO, 0-9)
SIGNAL LEVEL ( OFF, SL1, SL2)
PICTURE ADVANCE (2/1, 1/1, 1/2, 1/4, 1/8, STOP)
E/S WINDOW ( STD, WIDE)
SYSTEM SETUP soft key
FISH ALM LVL (HIGH,
NORMAL, LOW)
TX POWER ( ON, OFF)
TVG 200 kHz (0-9, Default: 5)
TVG 50 (0-9, Default: 5)
ECHO OFFSET 200 kHz (-20 to +20, Default: 0)
ECHO OFFSET 50 kHz (-20 to +20, Default: 0)
SEABED LVL 200 kHz (20 to 200, Default:80)
SEABED LVL 200 kHz (20 to 200, Default:80)
RANGE SETUP soft key
RANGE 1 ( Default: 15 ft)
RANGE 2 ( Default: 30 ft)
RANGE 3 ( Default: 60 ft)
RANGE 4 ( Default: 120 ft)
RANGE 5 (
Default: 200 ft)
RANGE 6 (
Default: 400 ft)
RANGE 7 ( Default: 1000 ft)
RANGE 8 ( Default: 2500 ft)
ZOOM RANGE (7 to 2500 ft, Default:30 ft)
B/L RANGE (10 ft, 20 ft)
Setting range: 7 to 2500 ft
BOTTOM ALARM (ON,
OFF)
FISH (B/L) ALARM (ON,
OFF)
FISH (NORMAL) ALARM (ON, OFF)
TEMP ALARM (ON, OFF)
DEMO MODE (ON, OFF)
DEMO SPEED
DEMO COURSE
DEMO START LAT
DEMO START LON