Furuno GP-1640, Operator'S Manual

Page: 37 / 96

5-5
5.4 Waypoint Mark Size
You may change the size of all waypoint marks
to small or large (default), or turn them off.
1. Press the [MENU] key to open the main
menu.
2. Press the CHART SETUP OPTIONS soft
key.
3. Press the CHART DETAILS soft key to
open the CHART DETAIL menu.
GPS 3D
CHART
DETAIL
RETURN
EDIT
DEPTH
INFO
LAT/LON GRID
TEXT INFO
WAYPOINT
WAYPOINT NAME
INDEX
LANDMASS
DISPLAY MODE
NAV AIDS
SECTOR INFO
OTHER SYMBOLS
MARK SIZE ON
ON
LARGE
ON
ON
BRT
DAY
ON
OFF
ON
STD
▼
Chart details menu
4. Press ▲ or ▼ to select WAYPOINT.
5. Press the EDIT soft key.
6. Press
▲ or ▼ to select LARGE, SMALL or
OFF. LARGE shows mark in actual shape.
SMALL displays all waypoints with an “X”
regardless of mark shape selected.
7. Press the ENTER soft key or [ENTER] key.
5.5 Changing Waypoint
Position on the Plotter
Display
You may change the latitude and longitude
position of waypoints on the plotter display as
follows:
1. Press the [WPT/RTE] key followed by the
WAYPOINTS soft key to open the WPT
menu.
2. Press the WAYPOINT BY CURSOR soft
key. The plotter display appears.
3. Operate the cursor pad to place the cursor
on the waypoint which you want to change.
A flashing diamond mark appears on the
waypoint when it is correctly selected.
4. Press the EDIT/MOVE soft key.
5. Press the MOVE WPT soft key.
6. Operate the cursor pad to place the cursor
on the location desired.
7. Press the [ENTER] key.
The waypoint moves to the cursor position and
its new position is recorded on the waypoint list.
If the waypoint is set as destination or is part of
a route, you are asked if you are sure to move
the waypoint. In this case, press the [ENTER]
key again, or the [CLEAR] key to cancel move.
5.6 Searching Waypoints
You can search for a waypoint through the
alpha/numeric list as follows:
1. Press the [WPT/RTE] key, and then press
the WAYPOINTS and ALPHA/NUMERIC
LIST soft keys to show the alpha/numeric
list. At the bottom of the display the search
window appears.
SEARCH FOR _ _ _
Search window
2. Use the alphanumeric keys to enter the
first 1 - 3 characters in the search window.
The waypoint searched appears at the top
of the screen.