Furuno GP-1640, Operator'S Manual

Page: 25 / 96

3-1
3. TRACK
This section shows you what you can do with
track, from turning it on or off to changing its
plotting interval. Own ship’s track is displayed
in the default setting.
3.1 Displaying Track
1. Press the [MENU] key to open the main
menu.
MENU
GPS 3D
CHART SETUP OPTIONS
GPS/DGPS/TD OPTIONS
DISPLAY OPTIONS
CONFIGURATION
Main menu
2. Press the CHART SETUP OPTIONS soft
key to open the chart setup menu.
CHART
SETUP
GPS 3D
CHART OFFSET
CHART DETAILS
TRACK CONTROL
RETURN
Chart setup menu
3. Press the TRACK CONTROL soft key to
open the track control menu.
GPS 3D
TRACK
CONTROL
DISPLAY TRACK
ON
PLOT
TIME
TIME INTERVAL
01m00s
DIST INTERVAL
00.10 nm
TRACK MEMORY
2000 POINTS
(MARK MEMORY)
(3000) POINTS
TRACK : 1000 / 2000 PTS used
MARK : 5 / 3000 PTS used
EDIT
ERASE
T & M
RETURN
TRACKING
TRACK STATUS
STOP
TRACK
Track control menu
4. Press ▲ or ▼ to select DISPLAY TRACK.
5. Press the EDIT soft key to show the display
track window.
6. Press ▲ or ▼ to select ON or OFF as
appropriate.
7. Press the ENTER soft key or the [ENTER]
key.
8. Press the [PLOT] key to close the menu.
The default setting is ON which traces ship’s
track in accordance with ship’s movements.
Number of track and mark points used appears
at the TRACK STATUS window on the TRACK
CONTROL display. In case of figure shown
above, track memory is recorded 1000 points
(max. 2000 points) and mark memory is
recorded 5 points (max. 3000 points).