Furuno FS-5070, Installation Manual

Page: 27 / 84

2-3
Outdoor wiring of antenna wire
When mounting the antenna coupler outdoors, arrange the antenna wire as shown below to
prevent it from loosing. The optional antenna materials shown below are necessary.
Name Type Code Remarks
CP05-09010* 005-954-180 w/10 m antenna cable
Antenna materials
CP05-09020* 005-964-410 w/25 m antenna cable
*: See lists at the back of this manual.
1. Make a loop (diameter approx. 120 mm) in the antenna cable at the insulator of the
antenna coupler.
2. Pass the end of the antenna cable through the hole of the insulator and fasten the bolt.
3. Prepare a piece of antenna wire (approx. 300 mm) and wind it around the insulator one
turn.
4. Fasten the above piece of wire and antenna wire together with the wire clips near the
ends of the piece of wire.
5. Coat the bolt with silicone sealant.
Antenna wire
A piece of antenna wire
Antenna
Coupler
Insulator
Loop
Bolt