1. OPERATION
1-24
1.23.2
Setting the guard zone
1. Mentally create the guard zone you want to set.
2. Referring to (2) in Figure 1-22 operate the trackball to set the cursor at top left
corner of guard zone. Press the [GUARD ALARM] key. “*G (IN)” (or “*G
(OUT”)), with asterisk blinking, appears at the top right corner of the display.
See Figure 1-22 (2). (The asterisk indicates the guard zone is partially set.)
3. Operate the trackball to set the cursor bottom right corner of guard zone. See
Figure 1-22 (3).
4. Press the [GUARD ALARM] key. The asterisk disappears. See Figure 1-22
(4).
Guard zone
to set
* G (IN)
(2) Drag cursor to
top left corner of
zone and press
[GUARD ALARM].
Asterisk blinking
Drag cursor
here.
(1) Mentally create
the guard zone to set.
G (IN)
(3) Drag cursor to
bottom right corner
of zone and press
[GUARD ALARM].
(4) Guard zone
completed.
G (IN)
Guard
zone
Drag cursor
here.
Figure 1-22 How to set the guard zone
1.23.3
Silencing the aural alarm
Any radar targets violating the guard zone will trigger the aural alarm. You can
silence the alarm by pressing the [GUARD ALARM] key. When this is done, “G
(ACKN)” replaces “G (IN)” (or “G (OUT)).” This means the alarm is temporarily
deactivated. Press the [GUARD ALARM] key again to reactivate the alarm.
Summary of Contents for FR-7041R-MARK-2
Page 1: ...MARINE RADAR FR 7041R MARK 2 ...
Page 66: ......
