Furuno FR-1710, Operator'S Manual

Page: 4 / 78

ii
WARNING WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
Turn off the radar power
switch before servicing the
scanner unit. Post a warn-
ing sign near the switch
indicating it should not be
turned on while the scanner
unit is being serviced.
Prevent the potential risk of
being struck by the rotating
scanner and exposure to
RF radiation hazard.
Wear a safety belt and hard
hat when working on the
scanner unit.
Serious injury or death can
result if someone falls from
the radar scanner mast.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
Turn off the power immediately if water
leaks into the equipment or the equip-
ment is emitting smoke or fire.
Continued use of the equipment can cause
fire or electrical shock.
Use the proper fuse.
Fuse rating is shown on the equipment.
Use of a wrong fuse can result in equipment
damage.
Keep heater away from equipment.
Heat can alter equipment shape and melt
the power cord, which can cause fire or
electrical shock.
DANGER DANGER
Electrical shock hazard.
Do not touch anode cap
or its cable.
Name : Danger Label
Type : 14-055-4201
Code No. : 100-243-450
DANGER DANGER
Electrical shock hazard.
Do not touch parts inside
this cover.
Name : Danger Label
Type : 14-055-4202
Code No. : 100-245-220
DANGER DANGER
Electrical shock hazard.
Turn off power before
servicing.
Name : Danger Label
Type : 66-022-2012
Code No. : 100-237-730
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Name : Warning Label
Type : 86-003-1011
Code No. : 100-236-230
Danger/Warning Labels in Display
Unit
This radar system contains the danger/
warning labels shown below. Do not remove
the labels. If a label is peeling off or is illeg-
ible, contact a FURUNO agent for replace-
ment.