Furuno FPS8 Installation Information Download

Page: 1 / 6

FPS8 Power Steering Module for the NavPilot 700 711 720

Autopilot Installation Information

Compatible with the following pump models: PUMPHRP05-12, PUMPHRP05-24,

PUMPHRP11-12, PUMPHRP11-24, PUMPHRP17-12, PUMPHRP17-24

Table of Contents

1) Cover

2) Pre-Attachment Preparation

3) Attaching the FPS8 to the HRP Pump

4) Hydraulic Diagram – Single Helm and Single Cylinder

5) Hydraulic Diagram – Dual Helm and Dual Cylinder

6) Electrical Connection Diagram

Table of Contents

1) Cover

2) Pre-Attachment Preparation

3) Attaching the FPS8 to the HRP Pump

4) Hydraulic Diagram – Single Helm and Single Cylinder

5) Hydraulic Diagram – Dual Helm and Dual Cylinder

6) Electrical Connection Diagram

Summary of Contents for FPS8

Page 4: ...Hydraulic Diagram Single Helm Single Ram NavPilot HRP Pump with FPS8 Power Steering Module HELM CYLINDER A STARBOARD HELM TANK PORT STARBOARD PORT STARBOARD PORT ...

Page 5: ...l plug Lower Helm Station must have a non vented fill plug UPPER HELM B LOWER NavPilot HRP Pump with FPS8 Power Steering Module HELM A CYLINDER B CYLINDER A PORT PORT PORT PORT STARBOARD STARBOARD HELM TANK S T A R B O A R D STARBOARD STARBOARD PORT STARBOARD HELM TANK HELM TANK PORT ...

Page 6: ...wer Input Power Input TB4 TB3 TB10 TB11 TB12 TB6 TB7 TB2 TB1 TB2 TB1 12 24 VDC INPUT NavPilot 700 711 720 Processor FAP 7002 TB13 TB8 To TB5 Each of the sensor cables has the same 3 wires It does not matter which set of 3 go to pins 1 2 3 or 4 5 6 It only matters that the order of the wires are as follows Check out the collection of marine electronics navigation we offer ...