Furuno FMD3100, Operator'S Manual

Page: 316 / 395

21. PARAMETERS
21-4
21.4 Instant Track Parameters
The instant track feature can create, in route monitoring, a simple route in the following
situations:
• Return to the monitored route when the vessel goes outside the channel limits.
• Temporarily deviate from the monitored route (avoid collision, etc.).
How to set instant track parameters
Set the parameters for the instant track ([MENU]
o
[General]
o
[Ship & Route Param-
eters]
o
[Instant Track] tab).
[Delay before Initiating First Turn] : Set the number of seconds (30 to 600 seconds)
to wait before initiating the first turn in the simple route.
[Turn Radius] : Set the turning radius (0.02 to 3.00 NM) to use between waypoints
(four waypoints) in the simple route.
[XTD Limit] : Set the channel limit (10 to 3704 m) for the instant track, automatically
or manually. The [Auto] setting uses the channel limit set for the monitored route.
[Route Check Strictly] : Check to prevent monitoring of instant track when a chart
alert (alarm or warning) is found through the route check. Uncheck to monitor instant
track in spite of chart alert found through the route check.